Covers the theory, Inspection, diagnose and repair of automotive engines and related systems. Course also includes the inspection and repair of brake systems; suspension systems to include alignment procedures, electrical systems, diagnose and test charging and starting systems. Perform all scheduled maintenance per OEM specification to include brake system, cooling, power steering, and differential flushes. Upon completion of this course students should be able to perform minor repairs,  flush and repair all fluid related systems, repair all electrical systems, select and choose proper tire selection per OEM specifications. Designed for the DIY student. OSHA approved safety glasses, steel toed shoes should be worn at all classes.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

Our truck driving training program provides graduates with an excellent foundation for a truck driving career. Students are thoroughly tested on the road and through written exams to ensure that they possess the necessary skills and knowledge to successfully and safely operate commercial vehicles.

The Class “A” Commercial Drivers License (CDL) course provides students with training to inspect and operate tractor-trailers and assume driving responsibilities on the road. Emphasis is placed on vehicle inspections, defensive driving, range maneuvers and motor carrier safety regulations and certification. Additional topics include trip planning, hours of service, cargo planning, size/weight laws and general maintenance procedures. This program meets the Federal Motor Carrier Safety Administration (FMCSA) standards of specialized training in the areas of driver qualification, hours of service, driver wellness, and whistleblower protection for entry-level drivers who are subject to the requirements (49 CFR Part 380).

The Commercial Truck Driving program provides the training for the North Carolina State Commercial Truck Driving License examination for new drivers.

All training instruction is provided at school facilities and in school provided equipment. The day class meets Monday/Tuesday/Wednesday/Thursday/Friday, 8 am -5 pm. The evening class meets Monday/Tuesday/Wednesday/Thursday, 6 – 10 pm, and Saturday, 8 am-6:30 pm.

Enrollment Requirements

1. Be at least 18 years of age.
2. Have a valid North Carolina driver’s license.
3. Pass and obtain a US Department of Transportation (DOT) physical examination no more than 6 months prior to start of class.
4. Obtain a driving record not more than 3 months prior to the start of class. Any of the following violations with four (4) years of finishing the class will prohibit entering the program:
   1. Driving while impaired (DWI).
   2. Careless and reckless driving.
   3. Hit and run.
   4. Refusal to take chemical test.
5. Pass a DOT drug screening test at a lab designated by the school.

A four-hour orientation session will be held  prior to the start of each course. This will ensure students have enough time to take care of all requirements needed to enter the CDL Program.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

Required: CDL Orientation

Course satisfies the requirements set by the N.C. Department of Transportation to certify Oversize-Overweight load escort vehicle drivers. Escort drivers are required to take a four-hour re-certification class every four years. Students must be 21 years or older to become certified.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

Learn how to meet OSHA’s Powered Industrial Truck Standard using the National Safety Council’s Coaching the Lift Truck Operator Training Program. Participants will learn: operator training definitions from OSHA and NIOSH, lift truck design, vehicle safety inspections, moving with and without a load, picking up and stacking a load utilizing scanning techniques. Special considerations such as trailers, ramps and elevators, and pedestrian safety are covered.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

Learn how to meet OSHA’s Powered Industrial Truck Standard using the National Safety Council’s Coaching the Lift Truck Operator Training Program. Participants will learn: operator training definitions from OSHA and NIOSH, lift truck design, vehicle safety inspections, moving with and without a load, picking up and stacking a load utilizing scanning techniques. Special considerations such as trailers, ramps and elevators, and pedestrian safety are covered.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

This course prepares technicians and service personnel as OBD emission inspectors for motor vehicles. Course topics include regulations and test inspection procedures required by the NC DMV – Enforcement Section for OBD emission inspectors. Upon completion, a student should understand the rules, regulations and procedures for OBD emission inspections, be able to inspect a vehicle properly and be prepared to sit for the state certification exam.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

This course prepares auto technicians and service personnel as safety and emission inspectors for motor vehicles. Includes regulations and test inspection procedures and is taught to ensure that the student understands the rules and regulations, can inspect a vehicle properly and can successfully pass qualification exams for certification as a safety and emissions inspector at a licensed inspection station.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

This course will teach you to repair and maintain a small two-stroke or four-stroke engine. This short-term course will teach you how to assess and perform routine maintenance on small engine/power equipment, from lubricating parts and replacing spark plugs to testing and inspecting for engine malfunctions, replacement and sharpening of lawnmower blades. You will be taught to replace worn, defective, or broken parts, reassemble engine components, and follow manufacturers’ recommended general maintenance and repair of small engine/power equipment. The class will also include general combustion theory and principles.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

This course will teach you to repair and maintain a small two-stroke or four-stroke engine. This short-term course will teach you how to assess and perform routine maintenance on small engine/power equipment, from lubricating parts and replacing spark plugs to testing and inspecting for engine malfunctions, replacement and sharpening of lawnmower blades. You will be taught to replace worn, defective, or broken parts, reassemble engine components, and follow manufacturers’ recommended general maintenance and repair of small engine/power equipment. The class will also include general combustion theory and principles.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

Artists and the welding industry are a natural merger for sculpture. This course will focus on the basic MIG and stick welding processes, oxy acetylene, and Plasma cutting necessary for artists to work creatively to fabricate assigned projects. Safety is of utmost importance and students must attend class with proper personal protective equipment which includes no synthetic, ripped or frayed clothing, steel toe shoes, welding gloves, welding sleeves/jacket and welding cap. Each student is responsible for providing their own tools and welding helmet.

Required Supplies: Safety glasses, 4 ½” Grinder, 4 ½” Grinding discs, Welding helmet (Auto darkening recommended), Gloves, Chipping hammer, Wire brush, Welding sleeves or jacket, Pliers for handling hot metal and Steel-toed boots.

Recommended supplies: Tool bag, MIG Gloves, TIG Gloves, .8” Welders pliers, 4 ½” Wire wheels, 4 ½” Flap wheels, 10” Vise Grip pliers, Tape measure, Three flint striker, Ear plugs, Face shield shade 3-4 tint and clear, Soapstone w/holder.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

Artists and the welding industry are a natural merger for sculpture. This course will focus on the basic MIG and stick welding processes, oxy acetylene, and Plasma cutting necessary for artists to work creatively to fabricate assigned projects. Safety is of utmost importance and students must attend class with proper personal protective equipment which includes no synthetic, ripped or frayed clothing, steel toe shoes, welding gloves, welding sleeves/jacket and welding cap. Each student is responsible for providing their own tools and welding helmet.

Required Supplies: Safety glasses, 4 ½” Grinder, 4 ½” Grinding discs, Welding helmet (Auto darkening recommended), Gloves, Chipping hammer, Wire brush, Welding sleeves or jacket, Pliers for handling hot metal and Steel-toed boots.

Recommended supplies: Tool bag, MIG Gloves, TIG Gloves, .8” Welders pliers, 4 ½” Wire wheels, 4 ½” Flap wheels, 10” Vise Grip pliers, Tape measure, Three flint striker, Ear plugs, Face shield shade 3-4 tint and clear, Soapstone w/holder.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

This class is designed to provide individuals with the opportunity to test for Welding Certification(s) per American Welding Society specifications.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

This course is designed to enhance skills with the shielded metal arc (stick) welding process. Emphasis is placed on advancing manipulative skills with SMAW electrodes on varying joint geometry. Upon completion, students should be able to perform groove welds on carbon steel with prescribed electrodes in the flat, horizontal, vertical, and overhead positions.. Required Supplies: Safety glasses,4 ½”Grinder, 4 ½” Grinding discs, Welding helmet (Auto darkening recommended), Gloves, Chipping hammer, Wire brush, Welding sleeves or jacket, Pliers for handling hot metal and Steel-toed boots. Recommended supplies: Tool bag, MIG Gloves, TIG Gloves,.8” Welders pliers,4 ½” Wire wheels, 4 ½” Flap wheels, 10” Vise Grip pliers, Tape measure, Three flint striker, Ear plugs, Face shield shade 3-4 tint and clear, Soapstone w/holder.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu

This course is designed to enhance skills with the shielded metal arc (stick) welding process. Emphasis is placed on advancing manipulative skills with SMAW electrodes on varying joint geometry. Upon completion, students should be able to perform groove welds on carbon steel with prescribed electrodes in the flat, horizontal, vertical, and overhead positions.. Required Supplies: Safety glasses,4 ½”Grinder, 4 ½” Grinding discs, Welding helmet (Auto darkening recommended), Gloves, Chipping hammer, Wire brush, Welding sleeves or jacket, Pliers for handling hot metal and Steel-toed boots. Recommended supplies: Tool bag, MIG Gloves, TIG Gloves,.8” Welders pliers,4 ½” Wire wheels, 4 ½” Flap wheels, 10” Vise Grip pliers, Tape measure, Three flint striker, Ear plugs, Face shield shade 3-4 tint and clear, Soapstone w/holder.

For more information contact Richard McCormac  at 252-222-6203 or mccormacr@carteret.edu